UNS N08367super austenitic stainless steel, AL-6XN plate, sheet, strip, wire, rod, bar

AL-6XN super austenitic stainless  steel    AL-6XN plate, sheet, strip, wire, rod, bar

UNS N08367 super austenitic stainless  steel  

• Introduction of AL-6XN
  • AL-6XN is a super austenitic stainless  steel with outstanding resistance to chloride pitting, crevice corrosion and  stress corrosion cracking. AL6XN is a 6 moly alloy that was developed for and  is used in highly aggressive environments.   It has high nickel (24%), molybdenum (6.3%), nitrogen and chromium  contents that give it excellent resistance to chloride stress corrosion  cracking, chloride pitting, and exceptional general corrosion resistance.  AL6XN is primarily used for its improved pitting and crevice corrosion  resistance in chlorides. It is a formable and weldable stainless steel.
  • Because of its nitrogen content, AL6XN / UNS N08367 has greater tensile strength than  common Austenitic stainless, while retaining high ductility and impact  strength.
  • Density: 8.06g/cm3
• Character of AL-6XN
  • l    Excellent resistance to pitting and crevice corrosion  in chloride solutions
  • l    Practical immunity to stress corrosion in NaCl  environments
  • l    High Strength and toughness
• Application of UNS N08367
  • l    Reverse osmosis desalination equipment and pumps
  • l    FGD Scrubbers
  • l    Chemical process tanks and pipelines
  • l    Seawater heat exchangers
  • l    Tall oil distillation columns and packing
  • l    Offshore oil and gas production equipment
  • l    Pulp bleaching plant washers, vats, press rolls and  pipelines
• Equal grades
  • 1.4501, UNS N08367, 00Cr20Ni24Mo6N
• Chemical  composition
  • Ni=23.5~25.5, Cr=20.00~22.00,  Mo=6.00~7.00, C≤0.03, N=0.18~0.25, Mn≤2.0, Si≤1.00, P≤0.040, S≤0.030,  Cu≤0.75, Fe=remainder
• Standards of UNS N08367
  • ASTM B675, ASTM A312,
  • ASTM B676, ASTM A249,
  • ASTM B688, ASTM A240,
  • ASTM B691, ASTM A479,
  • ASTM B462, ASTM A182
• Forms of Al-6XN  available at A-one Alloy
  • Plate, sheet, strip, wire, rod, bar,  forging, pipe, tube
  • Al-6XN sheet/plate in stock-Japan  & EU &US origin. We could do cutting, splitting and fabrication for  our customers.
  • Thickness of plates in stock: 0.40-60mm
• Delivery
  • Please contact A-one Alloy for  confirmation.

* AL-6XN® is a registered trademark of theAllegheny Ludlum Corporation