Hastelloy* C4 (UNS N06455)
|
Introduction
Hastelloy C4 is a nickel-chromium-molybdenum alloy which has improved thermal stability. In this alloy, the tungsten was totally omitted and the iron content was reduced to approximately 1%. The alloy also contains approximately 0.3% Ti.
Density:8.64g/cm3
|
|
Character
Outstanding high-temperature stability; exhibits good ductility and corrosion resistance after long-time aging at 650 to 1040 °C (1200–1900 °F). Resists formation of grain-boundary precipitates in weld heat-affected zones, and is suitable for most chemical process applications in the as-welded condition. Has excellent resistance to stress-corrosion cracking and to oxidizing atmospheres up to 1040 °C (1900 °F).
Hastelloy C4 has exceptional resistance to a variety of chemical process environments, including hot contaminated mineral acids, solvents, chlorine, and chlorine-contaminated media (organic and inorganic, dry chlorine, formic and acetic acids, acetic anhydride, seawater, and brine). The general corrosion resistance of Alloy C276 and Alloy C4 was essentially the same in many corrosive environments, except that in strongly reducing media like hydrochloric acid, Alloy C276 was better; but in highly oxidizing media, the opposite was true, that is, Alloy C4 was better. Alloy C4 offers good corrosion resistance to a wide variety of media including organic acids and acid chloride solutions. This alloy has found greater acceptance in European countries in contrast to Alloy C276, which is more widely used and accepted in the United States.
|
|
Application
It has been widely used in the field of chemical engineering and high temperature environment. Typical application areas:
l Flue gas desulfurization system
l Acid pickling and acid recycling plant
l Acetic acid and agricultural chemicals production
l Titanium dioxide production (chlorine method)
l Electrolytic plating
|
|
Equal grades
Hastelloy C-4, NS335, NS3305, 2.4610
|
|
Chemical composition (%)
Cr=14.00~18.00,Mo=14.00~17.00,Fe≤3.00,C≤0.015,Si≤0.08,Co≤2.00,Mn≤1.00,P=≤0.04,S≤0.03,Ti≤0.07,Ni=Remainder
|
|
Standards
ASTM B574
ASTM B619
|
|
Forms available at A-one Alloy
Plate, sheet, strip, bar, wire, rod, tube, pipe, forging, ring, casting
|
|
Delivery
Plenty of bar and billet in stock. For orders the delivery of bar and forging is 20 days. Delivery of other products please confirm with A-one Alloy.
|
*Hastelloy is the registered trademark name of Haynes International, Inc.
About A-ONE Alloy
Suzhou A-one Special Alloy Co. Ltd- referred as A-ONE Alloy hereafter, is a professional manufacturer of high performance alloy products. A-ONE Alloy is engaged in supplying high quality and cost effective Superalloy, Anti-Corrosion Alloy, Precision Alloy, Special Stainless Steel and Magnetostrictive Material to customers from worldwide.
Why A-ONE Alloy
· Rich experience in alloy industry
· Top rank experts of industry in China
· Advanced technology and process from top famous institutes in China
· Advanced devices through whole production and inspection process
· Strict quality control system
· Company motto: best service, most value
· Smart sales policy
A-ONE Alloy Service Items
· Non-standard product research and pre-production
· Fabrication of products
· Cutting, splitting for sheets and plates in stock
· Heat treatment(Solution treatment, aging harden treatment, anneal, spring temper, quench etc.)
· Surface finish(peeling, gridding)
· Logistics service
· Customized packing service(also for exporting)
· Import and export(A-ONE Alloy is certificated)
· Document translation
· Hard-to-find material sourcing
Customers of A-ONE Alloy
Customers of A-one Alloy are all over China (Taiwan and Hong Kong included). And we are exporting to USA, Canada, Italy, UK, Poland, Greece, Russia, Turkey, Iran, Israel, South Africa, South Korea, North Korea, India, Argentina, and Brazil and so on. Customers from 30+ countries trust us.
Where is A-ONE Alloy
A- A-ONE Alloy is located in No.2 Weihua Road, Suzhou Industrial Park, Jiangsu Province, China
B- ONE Alloy is around 130KM from Shanghai Pudong International Airport(PVG).
C- 13KM from Suzhou Railway Station
D- 7KM from Yangchenghu Station, Jinghu(G2) Highway
E- You can contact A-ONE Alloy sales for a pickup service
